Hang ‘em High with LA Choppers

1

October 12, 2010 | By: Patrick Garvin

In my travels from bike event to bike event I seem to get bombarded by the same questions over and over again. Because of their frequency, I think that means they’re good questions. And one of the questions I get a lot is from folks putting ape hangers on their bike. They want to know how long the brake and clutch cables need to be.

To tell the truth, that’s not exactly an easy question to answer and it usually entails me asking a barrage of my own questions. This leads to the customer and myself chasing down a multitude of part numbers before landing on a viable solution.

Well guess what? Those geniuses over at LA Choppers have come up with an easier solution for all you guys (and ladies) looking to put a set of ape hangers on your current ride. They’ve put together complete kits that include the throttle cables, clutch and brake lines that you need to fit your bike, no matter how high your apes are. You get everything you need to make the switch to taller bars in one package. The kits come in black and stainless and go all the way up to 20 inches! If your handlebars are higher than that then we can’t help you — and I’m not just talking about your cables.

So if you’ve been kicking around the idea of stretching out a bit on your bike but were in a bit of tailspin on what to do with your cables, your prayers have been answered. This is a great no-hassle way to get everything you need in one fell swoop. No guess work here —  just slap these puppies on and hang ’em high!

Comments: 1 Comment | Categorized Under: Product Information

Comments (1)

[...] This post was mentioned on Twitter by jpcycles, LA Choppers. LA Choppers said: Thanks to @JPCycles for their write-up on our cable kits: http://tinyurl.com/28xlgpy [...]

Leave a comment